HP 6125XLG R2306-HP 6125XLG Blade Switch IP Multicast Command Reference - Page 29
igmp-snooping static-router-port, Predefined user roles, Parameters, Usage guidelines, Examples
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
Predefined user roles network-admin Parameters group-address: Specifies a multicast group by its IP address, in the range of 224.0.1.0 to 239.255.255.255. source-address: Specifies a multicast source by its IP address. all: Specifies all VLANs. vlan vlan-id: Specifies a VLAN. The value range for the vlan-id argument is 1 to 4094. Usage guidelines The source-ip source-address option is meaningful only for IGMPv3 snooping. If IGMPv2 snooping is running, the source-ip source-address option does not take effect, although you can include source-ip source-address in the command. Examples # Configure Ten-GigabitEthernet 1/1/5 in VLAN 2 as a static member port for the multicast source and group (1.1.1.1, 225.0.0.1). system-view [Sysname] igmp-snooping [Sysname-igmp-snooping] quit [Sysname] vlan 2 [Sysname-vlan2] igmp-snooping enable [Sysname-vlan2] igmp-snooping version 3 [Sysname-vlan2] quit [Sysname] interface ten-gigabitethernet 1/1/5 [Sysname-Ten-GigabitEthernet1/1/5] igmp-snooping static-group 225.0.0.1 source-ip 1.1.1.1 vlan 2 igmp-snooping static-router-port Use igmp-snooping static-router-port to configure a port as a static router port. Use undo igmp-snooping static-router-port to restore the default. Syntax igmp-snooping static-router-port vlan vlan-id undo igmp-snooping static-router-port { all | vlan vlan-id } Default A port is not a static router port. Views Ethernet interface view, aggregate interface view Predefined user roles network-admin Parameters all: Specifies all VLANs. 22