HP 6125XLG R2306-HP 6125XLG Blade Switch IP Multicast Command Reference - Page 138
ipv6 multicast routing-enable, reset ipv6 multicast forwarding-table, Syntax, Default, Views
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 138 highlights
[Sysname] ipv6 multicast longest-match ipv6 multicast routing-enable Use ipv6 multicast routing-enable to enable IPv6 multicast routing. Use undo ipv6 multicast routing-enable to disable IPv6 multicast routing. Syntax ipv6 multicast routing-enable undo ipv6 multicast routing-enable Default IPv6 multicast routing is disabled. Views System view Predefined user roles network-admin Usage guidelines You must enable IPv6 multicast routing before you can execute other Layer 3 IPv6 multicast commands. The device does not forward any IPv6 multicast packets before IPv6 multicast routing is enabled. Examples # Enable IPv6 multicast routing. system-view [Sysname] ipv6 multicast routing-enable reset ipv6 multicast forwarding-table Use reset ipv6 multicast forwarding-table to clear forwarding entries from the IPv6 multicast forwarding table. Syntax reset ipv6 multicast forwarding-table { { ipv6-source-address [ prefix-length ] | ipv6-group-address [ prefix-length ] | incoming-interface { interface-type interface-number } } * | all } Views User view Predefined user roles network-admin Parameters ipv6-source-address: Specifies an IPv6 multicast source address. ipv6-group-address: Specifies an IPv6 multicast group address, in the range of FFxy::/16, where "x" and "y" represent any hexadecimal number from 0 to F. 132