HP 6125XLG R2306-HP 6125XLG Blade Switch IP Multicast Command Reference - Page 27
igmp-snooping router-aging-time
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
[Sysname] interface ten-gigabitethernet 1/1/5 [Sysname-Ten-GigabitEthernet1/1/5] igmp-snooping overflow-replace vlan 2 Related commands overflow-replace (IGMP-snooping view) igmp-snooping router-aging-time Use igmp-snooping router-aging-time to set the aging timer for the dynamic router ports in a VLAN. Use undo igmp-snooping router-aging-time to restore the default. Syntax igmp-snooping router-aging-time interval undo igmp-snooping router-aging-time Default The default setting is 260 seconds. Views VLAN view Predefined user roles network-admin Parameters interval: Sets an aging timer (in seconds) for the dynamic router ports in a VLAN, in the range of 1 to 1000. Usage guidelines You must enable IGMP snooping for a VLAN before you configure this command for the VLAN. The configuration made in VLAN view is only effective on the current VLAN and takes preference over the global configuration. Examples # Enable IGMP snooping for VLAN 2 and set the aging timer for the dynamic router ports in the VLAN to 100 seconds. system-view [Sysname] igmp-snooping [Sysname-igmp-snooping] quit [Sysname] vlan 2 [Sysname-vlan2] igmp-snooping enable [Sysname-vlan2] igmp-snooping router-aging-time 100 Related commands • igmp-snooping enable • router-aging-time (IGMP-snooping view) 20