HP 6125XLG R2306-HP 6125XLG Blade Switch IP Multicast Command Reference - Page 9
display igmp-snooping group, Syntax, Views, Predefined user roles, Parameters
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
Version: 3 Host-aging-time: 260s Router-aging-time: 260s Max-response-time: 10s Last-member-query-interval: 1s Table 1 Command output Field IGMP snooping Drop-unknown Version Host-aging-time Router-aging-time Max-response-time Last-member-query-interval Description IGMP snooping status: • Enabled. • Disabled. Status of dropping unknown multicast data: • Enabled. • Disabled. IGMP snooping version. Aging timer for the dynamic member port. Aging timer for the dynamic router port. Maximum response time for IGMP general queries. Interval for sending IGMP group-specific queries. display igmp-snooping group Use display igmp-snooping group to display information about dynamic IGMP snooping forwarding entries. Syntax display igmp-snooping group [ group-address | source-address ] * [ vlan vlan-id ] [ verbose ] [ slot slot-number ] Views Any view Predefined user roles network-admin network-operator Parameters group-address: Specifies a multicast group by its IP address, in the range of 224.0.1.0 to 239.255.255.255. If no multicast group is specified, this command displays information about the dynamic IGMP snooping forwarding entries for all multicast groups. source-address: Specifies a multicast source by its IP address. If no multicast source is specified, this command displays information about the dynamic IGMP snooping forwarding entries for all multicast sources. vlan vlan-id: Specifies a VLAN. The value range for the vlan-id argument is 1 to 4094. If no VLAN is specified, this command displays information about the dynamic IGMP snooping forwarding entries for all VLANs. 2