HP 6125XLG R2306-HP 6125XLG Blade Switch IP Multicast Command Reference - Page 33
reset igmp-snooping group, Syntax, Views, Predefined user roles, Parameters, Examples
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
reset igmp-snooping group Use reset igmp-snooping group to remove the dynamic IGMP snooping forwarding entries for the specified multicast groups. Syntax reset igmp-snooping group { group-address [ source-address ] | all } [ vlan vlan-id ] Views User view Predefined user roles network-admin Parameters group-address: Specifies a multicast group by its IP address, in the range of 224.0.1.0 to 239.255.255.255. source-address: Specifies a multicast source by its IP address. If no multicast source is specified, this command removes the dynamic IGMP snooping forwarding entries for all multicast sources. all: Specifies all multicast groups. vlan vlan-id: Specifies a VLAN. The value range for the vlan-id argument is 1 to 4094. Examples # Remove the dynamic IGMP snooping forwarding entries for all multicast groups. reset igmp-snooping group all Related commands display igmp-snooping group reset igmp-snooping router-port Use reset igmp-snooping router-port to remove dynamic router ports. Syntax reset igmp-snooping router-port { all | vlan vlan-id ] Views User view Predefined user roles network-admin Parameters all: Specifies all VLANs. vlan vlan-id: Specifies a VLAN. The value range for the vlan-id argument is 1 to 4094. Examples # Remove all dynamic router ports. reset igmp-snooping router-port all 26