HP 6125XLG R2306-HP 6125XLG Blade Switch IP Multicast Command Reference - Page 119
mld-snooping last-listener-query-interval
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 119 highlights
Parameters interval: Sets an aging timer (in seconds) for the dynamic member ports in a VLAN., in the range of 200 to 1000. Usage guidelines You must enable MLD snooping for a VLAN before you configure this command for the VLAN. The configuration made in VLAN view is only effective on the current VLAN and takes preference over the global configuration. Examples # Enable MLD snooping for VLAN 2 and set the aging timer for the dynamic member ports in the VLAN to 300 seconds. system-view [Sysname] mld-snooping [Sysname-mld-snooping] quit [Sysname] vlan 2 [Sysname-vlan2] mld-snooping enable [Sysname-vlan2] mld-snooping host-aging-time 300 Related commands • host-aging-time (MLD-snooping view) • mld-snooping enable mld-snooping last-listener-query-interval Use mld-snooping last-listener-query-interval to set the MLD last-listener query interval for a VLAN. Use undo mld-snooping last-listener-query-interval to restore the default. Syntax mld-snooping last-listener-query-interval interval undo mld-snooping last-listener-query-interval Default The default setting is 1 second. Views VLAN view Predefined user roles network-admin Parameters interval: Sets the MLD last-listener query interval (in seconds), in the range of 1 to 5. Usage guidelines The MLD last-listener query interval determines the interval for sending MLD multicast-address-specific queries and the maximum response delay for MLD multicast-address-specific queries in a VLAN. You must enable MLD snooping for a VLAN before you configure this command for the VLAN. 113