HP 6125XLG R2306-HP 6125XLG Blade Switch IP Multicast Command Reference - Page 120
mld-snooping max-response-time
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 120 highlights
The configuration made in VLAN view is only effective on the current VLAN and takes preference over the global configuration. Examples # Enable MLD snooping for VLAN 2 and set the MLD last-listener query interval to 3 seconds. system-view [Sysname] mld-snooping [Sysname-mld-snooping] quit [Sysname] vlan 2 [Sysname-vlan2] mld-snooping enable [Sysname-vlan2] mld-snooping last-listener-query-interval 3 Related commands • last-listener-query-interval (MLD-snooping view) • mld-snooping enable mld-snooping max-response-time Use mld-snooping max-response-time to set the maximum response delay for MLD general queries in the VLAN. Use undo mld-snooping max-response-time to restore the default. Syntax mld-snooping max-response-time interval undo mld-snooping max-response-time Default The default setting is 10 seconds. Views VLAN view Predefined user roles network-admin Parameters interval: Sets the maximum response delay (in seconds) for MLD general queries, in the range of 1 to 25. Usage guidelines You must enable MLD snooping for a VLAN before you configure this command for the VLAN. The configuration made in VLAN view is only effective on the current VLAN and takes preference over the global configuration. Examples # Enable MLD snooping for VLAN 2 and set the maximum response delay for MLD general queries to 5 seconds. system-view [Sysname] mld-snooping [Sysname-mld-snooping] quit [Sysname] vlan 2 114