HP 6125XLG R2306-HP 6125XLG Blade Switch IP Multicast Command Reference - Page 25
igmp-snooping max-response-time, Predefined user roles, Parameters, Usage guidelines, Examples
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
Predefined user roles network-admin Parameters interval: Sets the IGMP last-member query interval, in the range of 1 to 5. Usage guidelines The IGMP last-member query interval determines the interval for sending IGMP group-specific queries and the maximum response time for IGMP group-specific queries in a VLAN. You must enable IGMP snooping for a VLAN before you configure this command for the VLAN. The configuration made in VLAN view is only effective on the current VLAN and takes preference over the global configuration. Examples # Enable IGMP snooping for VLAN 2 and set the IGMP last-member query interval to 3 seconds. system-view [Sysname] igmp-snooping [Sysname-igmp-snooping] quit [Sysname] vlan 2 [Sysname-vlan2] igmp-snooping enable [Sysname-vlan2] igmp-snooping last-member-query-interval 3 Related commands • igmp-snooping enable • last-member-query-interval (IGMP-snooping view) igmp-snooping max-response-time Use igmp-snooping max-response-time to set the maximum response time for IGMP general queries in the VLAN. Use undo igmp-snooping max-response-time to restore the default. Syntax igmp-snooping max-response-time interval undo igmp-snooping max-response-time Default The default setting is 10 seconds. Views VLAN view Predefined user roles network-admin Parameters interval: Sets the maximum response time (in seconds) for IGMP general queries, in the range of 1 to 25. Usage guidelines You must enable IGMP snooping for a VLAN before you configure this command for the VLAN. 18