HP 6125XLG R2306-HP 6125XLG Blade Switch IP Multicast Command Reference - Page 94
source-lifetime (PIM view), Examples, Syntax, Default, Views, Predefined user roles, Parameters
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 94 highlights
Examples # Configure the device to calculate the checksum based on an entire register message. system-view [Sysname] pim [Sysname-pim] register-whole-checksum source-lifetime (PIM view) Use source-lifetime to set the multicast source lifetime. Use undo source-lifetime to restore the default. Syntax source-lifetime time undo source-lifetime Default The lifetime of a multicast source is 210 seconds. Views PIM view Predefined user roles network-admin Parameters time: Sets the multicast source lifetime (in seconds), in the range of 0 to 31536000. A value of 0 means that multicast sources are never aged out. Examples # Set the multicast source lifetime to 200 seconds. system-view [Sysname] pim [Sysname-pim] source-lifetime 200 source-policy (PIM view) Use source-policy to configure a multicast data filter. Use undo source-policy to remove the configured multicast data filter. Syntax source-policy acl-number undo source-policy Default No multicast data filter is configured. Views PIM view 88