HP 6125XLG R2306-HP 6125XLG Blade Switch IP Multicast Command Reference - Page 11
display igmp-snooping static-group
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
slot slot-number: Specifies a member device by its member ID. The slot-number argument specifies an IRF member device ID. If no member device is specified, this command displays information about the dynamic router ports on the master device in the IRF fabric. Examples # Display information about the dynamic router ports in VLAN 2. display igmp-snooping router-port vlan 2 VLAN 2: Router slots (0 in total): Router ports (2 in total): XGE1/1/5 (00:01:30) XGE1/1/6 (00:00:23) Table 3 Command output Field VLAN 2 Router ports (2 in total) (00:01:30) Description VLAN ID. Total number of dynamic router ports and the port list. Remaining time of the aging timer for the dynamic router port. On IRF devices, to display the remaining time for a non-aggregate interface on a member device that is not the master device in the IRF fabric, you must specify the slot slot-number option. For an aggregate interface, you do not need to do this. Related commands reset igmp-snooping router-port display igmp-snooping static-group Use display igmp-snooping static-group to display information about static IGMP snooping forwarding entries. Syntax display igmp-snooping static-group [ group-address | source-address ] * [ vlan vlan-id ] [ verbose ] [ slot slot-number ] Views Any view Predefined user roles network-admin network-operator Parameters group-address: Specifies a multicast group by its IP address, in the range of 224.0.1.0 to 239.255.255.255. If no multicast group is specified, this command displays information about the static IGMP snooping forwarding entries for all multicast groups. source-address: Specifies a multicast source by its IP address. If no multicast source is specified, this command displays information about the static IGMP snooping forwarding entries for all multicast sources. 4