HP 6125XLG R2306-HP 6125XLG Blade Switch IP Multicast Command Reference - Page 154
display ipv6 pim bsr-info, Examples, Related commands, Syntax, Views, Predefined user roles
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 154 highlights
the ACL does not take effect. The other optional parameters except the fragment keyword and the time-range keyword are ignored. The crp-policy command filters the IPv6 multicast group ranges advertised by C-RPs based on the group prefixes. For example, if the IPv6 multicast group range that a C-RP advertises is FF0E:0:1::/96 but the IPv6 multicast group range that the crp-policy command defines is FF0E:0:1::/120, the IPv6 multicast group range FF0E:0:1::/96 can pass. Examples # Configure the legal C-RP address range to 2001::2/64 and the IPv6 multicast group range to FF03::101/64, so that only devices in the address range of 2001::2/64 can be C-RPs for the IPv6 multicast group range FF03::101/64. system-view [Sysname] acl ipv6 number 3000 [Sysname-acl6-adv-3000] rule permit ipv6 source 2001::2 64 destination ff03::101 64 [Sysname-acl6-adv-3000] quit [Sysname] ipv6 pim [Sysname-pim6] crp-policy 3000 Related commands c-rp (IPv6 PIM view) display ipv6 pim bsr-info Use display ipv6 pim bsr-info to display BSR information in the IPv6 PIM-SM domain. Syntax display ipv6 pim bsr-info Views Any view Predefined user roles network-admin network-operator Examples # Display BSR information in the IPv6 PIM-SM domain. display ipv6 pim bsr-info Scope: non-scoped State: Accept Preferred Bootstrap timer: 00:01:44 Elected BSR address: 12:12::1 Priority: 64 Hash mask length: 126 Uptime: 00:21:56 Scope: 5 State: Accept Any Scope-zone expiry timer: 00:21:12 148