HP 6125XLG R2306-HP 6125XLG Blade Switch IP Multicast Command Reference - Page 30

igmp-snooping version, last-member-query-interval (IGMP-snooping view), Examples, Syntax, Default

Get HP 6125XLG PDF manuals and user guides View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals

Page 30 highlights

vlan vlan-id: Specifies a VLAN. The value range for the vlan-id argument is 1 to 4094. Examples # Configure Ten-GigabitEthernet 1/1/5 in VLAN 2 as a static router port. system-view [Sysname] interface ten-gigabitethernet 1/1/5 [Sysname-Ten-GigabitEthernet1/1/5] igmp-snooping static-router-port vlan 2 igmp-snooping version Use igmp-snooping version to specify the IGMP snooping version. Use undo igmp-snooping version to restore the default. Syntax igmp-snooping version version-number undo igmp-snooping version Default The default setting is IGMPv2 snooping. Views VLAN view Predefined user roles network-admin Parameters version-number: Specifies an IGMP snooping version, 2 or 3. Usage guidelines You must enable IGMP snooping for a VLAN before you configure this command for the VLAN. Examples # Enable IGMP snooping for VLAN 2 and specify IGMPv3 snooping for the VLAN. system-view [Sysname] igmp-snooping [Sysname-igmp-snooping] quit [Sysname] vlan 2 [Sysname-vlan2] igmp-snooping enable [Sysname-vlan2] igmp-snooping version 3 Related commands igmp-snooping enable last-member-query-interval (IGMP-snooping view) Use last-member-query-interval to set the IGMP last-member query interval globally. Use undo last-member-query-interval to restore the default. 23

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
23
vlan
vlan-id
: Specifies a VLAN. The value range for the
vlan-id
argument is 1 to 4094.
Examples
# Configure Ten-GigabitEthernet 1/1/5 in VLAN 2 as a static router port.
<Sysname> system-view
[Sysname] interface ten-gigabitethernet 1/1/5
[Sysname-Ten-GigabitEthernet1/1/5] igmp-snooping static-router-port vlan 2
igmp-snooping version
Use
igmp-snooping version
to specify the IGMP snooping version.
Use
undo igmp-snooping version
to restore the default.
Syntax
igmp-snooping version
version-number
undo igmp-snooping version
Default
The default setting is IGMPv2 snooping.
Views
VLAN view
Predefined user roles
network-admin
Parameters
version-number
: Specifies an IGMP snooping version, 2 or 3.
Usage guidelines
You must enable IGMP snooping for a VLAN before you configure this command for the VLAN.
Examples
# Enable IGMP snooping for VLAN 2 and specify IGMPv3 snooping for the VLAN.
<Sysname> system-view
[Sysname] igmp-snooping
[Sysname-igmp-snooping] quit
[Sysname] vlan 2
[Sysname-vlan2] igmp-snooping enable
[Sysname-vlan2] igmp-snooping version 3
Related commands
igmp-snooping enable
last-member-query-interval (IGMP-snooping view)
Use
last-member-query-interval
to set the IGMP last-member query interval globally.
Use
undo last-member-query-interval
to restore the default.