HP 6125XLG R2306-HP 6125XLG Blade Switch IP Multicast Command Reference - Page 168
hello-option neighbor-tracking (IPv6 PIM view
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 168 highlights
Default The global prune delay is 500 milliseconds. Views IPv6 PIM view Predefined user roles network-admin Parameters delay: Sets the prune delay (in milliseconds), in the range of 1 to 32767. Usage guidelines You can set the prune delay in IPv6 PIM view or interface view. The configurations made in IPv6 PIM view are effective on all interfaces, and the configurations made in interface view are effective on only the current interface. If you set the prune delay in both IPv6 PIM view and interface view, the configuration in interface view always takes precedence. Examples # Set the global prune delay to 200 milliseconds. system-view [Sysname] ipv6 pim [Sysname-pim6] hello-option lan-delay 200 Related commands • hello-option override-interval (IPv6 PIM view) • ipv6 pim hello-option lan-delay • ipv6 pim hello-option override-interval hello-option neighbor-tracking (IPv6 PIM view) Use hello-option neighbor-tracking to enable the neighbor tracking function globally and disable the join message suppression function. Use undo hello-option neighbor-tracking to restore the default. Syntax hello-option neighbor-tracking undo hello-option neighbor-tracking Default The neighbor tracking function is disabled, and the join message suppression function is enabled. Views IPv6 PIM view Predefined user roles network-admin 162