HP 7110 HP Officejet 7100 series all-in-one - (English) Reference Guide - Page 67
replace the printheads, Support and Specifications - officejet printhead replacement
View all HP 7110 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
maintain your hp officejet 7 Move the print carriage latch down, and make sure the loops catch the hooks. Snap the latch into place, then close the print carriage access door. 8 If the error message still appears, remove and reinsert the printhead again and close the print carriage access drawer. 9 If the error message still appears, replace the printhead as described in the following section. replace the printheads If you experience print quality issues that cannot be resolved by cleaning your printheads and you have verified that the printheads need to be replaced, you may need to replace them. You may also see front-panel display messages that indicate when individual printheads need to be replaced. See the Support and Specifications booklet for information on ordering replacement printheads. 1 Turn on the unit, then open the print-carriage access door by lifting the handle until the door locks into place. The print carriage moves to the center of the unit. 2 After the print carriage stops moving, release the gray print carriage latch and then lift the print carriage to access the printheads. reference guide 61