HP 7110 HP Officejet 7100 series all-in-one - (English) Reference Guide - Page 68

Remove the new printhead from its packaging and, being careful to touch - officejet printer

Page 68 highlights

chapter 8 Caution! To avoid damaging the printer, remove a printhead only when a replacement is available. If a printhead is removed without being replaced: - Close the print carriage and the print-carriage access door. - Replace the printhead within 24 hours. - Never remove an ink cartridge and a printhead at the same time. 3 Remove the old printhead by lifting the printhead handle and pulling upward. Pull the printhead handle upward 4 Remove the new printhead from its packaging and, being careful to touch only the black plastic, gently remove the plastic tape. Caution! Do not touch the copper contacts, the printhead tower, or the ink nozzles. Printhead tower Copper contacts Ink nozzles Plastic tape removing the plastic tape from the printhead 5 Match the color on the top of the printhead to the color on the printhead carriage. 6 Push the new printhead firmly down into the appropriate slot using the printhead handle. Do not touch the printhead tower, and do not remove the printhead handle. 62 hp officejet 7100 series

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96

hp officejet 7100 series
chapter 8
62
Caution!
To avoid damaging the printer, remove a printhead only
when a replacement is available. If a printhead is removed
without being replaced:
Close the print carriage and the print-carriage access door.
Replace the printhead within 24 hours.
Never remove an ink cartridge and a printhead at the same time.
3
Remove the old printhead by lifting the printhead handle and pulling
upward.
4
Remove the new printhead from its packaging and, being careful to touch
only the black plastic, gently remove the plastic tape.
Caution!
Do not touch the copper contacts, the printhead tower,
or the ink nozzles.
removing the plastic tape from the printhead
5
Match the color on the top of the printhead to the color on the printhead
carriage.
6
Push the new printhead firmly down into the appropriate slot using the
printhead handle. Do not touch the printhead tower, and do not remove
the printhead handle.
Pull the printhead handle upward
Plastic tape
Printhead tower
Copper contacts
Ink nozzles