HP DesignJet Z2600 User guide - Page 116
problems in preparing the printheads, it takes longer, up to 45 minutes. For a single, If the printer
View all HP DesignJet Z2600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 116 highlights
6. Ensure the end of the blue handle catches the wire loop on the near side of the carriage. 7. Lower the handle to rest on the carriage cover. When all the printheads have been inserted correctly and are accepted by the printer, the printer beeps. NOTE: If the printer does not beep when you insert the printhead and the Replace message appears on the front-panel display, the printhead may need to be reinserted. 8. Close the window. 9. The front-panel display confirms that all printheads are correctly inserted. The printer starts checking and preparing the printheads. The default routine process, when all printheads are changed, takes 20 minutes. If the printer finds problems in preparing the printheads, it takes longer, up to 45 minutes. For a single printhead insertion, the times vary between 2 and 40 minutes. After all printheads are checked and prepared, the printhead realignment procedure runs automatically if paper is loaded, see Align the printheads on page 151. 10. You are recommended to perform a color calibration after inserting a new printhead. See Color calibration on page 74. 108 Chapter 13 Handling ink cartridges and printheads ENWW