HP DesignJet Z2600 User guide - Page 168
Front-panel error messages, Text messages continued, Numerical error codes
View all HP DesignJet Z2600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 168 highlights
Text messages (continued) Message Remove [color] printhead Replace [color] cartridge Replace [color] printhead Reseat [color] cartridge Reseat [color] printhead Recommendation Remove the incorrect printhead and insert a new printhead of the correct type (color and number). See Handling ink cartridges and printheads on page 99. Replace the cartridge. See Handling ink cartridges and printheads on page 99. Remove the non-functional printhead and insert a new printhead of the correct type (color and number). See Handling ink cartridges and printheads on page 99. Remove and reinsert the same cartridge. See Handling ink cartridges and printheads on page 99. Remove and reinsert the same printhead, or try cleaning the electrical connections. If necessary, insert a new printhead. See The front-panel display recommends reseating or replacing a printhead on page 148. Numerical error codes Error code Recommendation 01.0, 01.1, 01.2 Restart the printer. 06:03 Restart the printer. 08:04 Restart the printer. If the problem persists, update the printer's firmware. See Update the firmware on page 111. 08:08 Retry the operation that you were attempting. If it fails again, restart the printer. If the problem persists, update the printer's firmware. See Update the firmware on page 111. 21, 21.1, 21:03, 21.1:03, 21:13, 21.2:13, 22.0, 22.1, 22.2, 22.3, 22.x:03, 24 Restart the printer. 26:01, 26.x:01 Bad contact detected in an ink cartridge (if present, x refers to the cartridge in slot x). Remove and reinsert the cartridge. If necessary, insert a new cartridge. 26:14 Update your printer's firmware. See Update the firmware on page 111. 27:01, 27.x:01 Too many printhead nozzles are not working (if present, x refers to the printhead in slot x). Remove and reinsert the printhead, or try cleaning the electrical connections. If necessary, insert a new printhead. See The front-panel display recommends reseating or replacing a printhead on page 148. 27:03 Printhead error. Restart the printer. 27:14 Update your printer's firmware. See Update the firmware on page 111. 31:03, 41:03, 42:03, 45.1:03, 45.2:03, 47:03, 56:03 Restart the printer. 61:01 The file format is wrong and the printer cannot process the job. If the job is password-protected, try sending it without password protection. Otherwise, update your printer's firmware and try again. See Update the firmware on page 111. 61:04.1, 61:04.2 Update your printer's firmware. See Update the firmware on page 111. 61:08.1 Resend the job without password protection. 66:08 The job cannot be printed on the paper type that is loaded. 68:03 Restart the printer. 71.04 Out of memory. 160 Chapter 20 Front-panel error messages ENWW