HP DesignJet Z2600 User guide - Page 149
Lines are too thick, too thin or missing, Lines appear stepped or jagged, Maximum detail
View all HP DesignJet Z2600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 149 highlights
These options are suggested for troubleshooting purposes and may adversely affect the final output quality or the time necessary to generate the print job. Therefore, they should be cancelled if they do not help to solve the problem. Lines are too thick, too thin or missing 1. Check that the paper type you have loaded corresponds to the paper type selected in the front panel and in your software. See View information about the paper on page 42. 2. Check that you are using appropriate print-quality settings for your purposes (see Printing on page 50). Select the custom print-quality options in the driver dialog, and try turning on the Maximum detail option (if available). You may wish to reprint your job at this point in case the problem has been solved. 3. If the resolution of your image is greater than the printing resolution, you may notice a loss of line quality. 4. If lines are too thin or missing, print the Image Diagnostics Print. See The Image Diagnostics Print on page 144. 5. If the problem remains, go to the front panel and press , then , then Image-quality maintenance > Calibration Status to see the printhead alignment status. If the status is PENDING, you should align the printheads. See Align the printheads on page 151. After alignment, you may wish to reprint your job in case the problem has been solved. 6. Go to the front panel and press , then , then Image-quality maintenance > Calibration Status to see the paper advance calibration status. If the status is DEFAULT, you should perform paper advance calibration: see Recalibrate the paper advance on page 130. If the problem persists despite all the above actions, contact your customer service representative for further support. Lines appear stepped or jagged If lines in your image appear stepped or jagged when printed: ENWW Lines are too thick, too thin or missing 141