HP LH4r HP Netserver LC 2000 Installation Guide - Page 105
Connecting the Monitor, Keyboard, Mouse, and UPS
View all HP LH4r manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 105 highlights
9 Connecting the Monitor, Keyboard, Mouse, and UPS Introduction This chapter provides the instructions for connecting a monitor, keyboard, mouse and Uninterruptible Power Supply (UPS) to the rear of the HP NetServer. Connecting the Monitor, Keyboard, and Mouse To connect the peripheral control devices and monitor to the HP NetServer LC 2000/2000r, refer to the following procedure. 1. Connect the monitor, keyboard, and mouse to the HP NetServer LC 2000/2000r using the connections provided on the rear of the chassis. See Figure 9-1. Keyboard Mouse Video NIC (Embedded) Serial Management Figure 9-1. Connection Ports (rear of chassis) 97
97
9
Connecting the Monitor, Keyboard,
Mouse, and UPS
Introduction
This chapter provides the instructions for connecting a monitor, keyboard, mouse
and Uninterruptible Power Supply (UPS) to the rear of the HP NetServer.
Connecting the Monitor, Keyboard, and Mouse
To connect the peripheral control devices and monitor to the HP NetServer
LC 2000/2000r, refer to the following procedure.
1.
Connect the monitor, keyboard, and mouse to the HP NetServer
LC 2000/2000r using the connections provided on the rear of the chassis.
See Figure 9-1.
Keyboard
Mouse
Video
NIC
(Embedded)
Serial
Management
Figure 9-1. Connection Ports (rear of chassis)