HP LH4r HP Netserver LC 2000 Installation Guide - Page 64
DIMM Installation
View all HP LH4r manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
Chapter 5 Installing Additional Memory Memory Installation Guidelines • The HP NetServer LC 2000/2000r uses only 133 MHz (PC133) SDRAM DIMMs, which are electrically different from the EDO and PC100 SDRAM memory modules used in previous HP NetServer models. • DIMM sizes supported are 64 MB, 128 MB, 256 MB, 512 MB, or 1 GB in any combination. • Supported memory capacity ranges from 64 MB to 4 GB maximum (1 GB per DIMM slot and 4 DIMM slots total). The minimum capacity is 64 MB (one DIMM). • DIMM sizes may be mixed on the system board and may be loaded in any order (0 through 3). • Open slots between DIMMs are permitted. • When handling DIMMs, observe anti-static precautions to avoid damage. DIMM Installation Use this procedure to install each DIMM in a DIMM slot on the system board. CAUTION Figure 5-1. Individual SDRAM DIMM Do not install EDO DIMMs or PC100 SDRAM from previous HP NetServers in the HP NetServer LC 2000/2000r. Use only DIMMs specified for the HP NetServer LC 2000/2000r. 56