HP LH4r HP Netserver LC 2000 Installation Guide - Page 39
To replace the bezel, insert the tabs at the bottom of the bezel into the slots
View all HP LH4r manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
Chapter 3 Opening and Closing the HP NetServer 12. To replace the left side cover, position the cover's tabs next to the respective holes along the outer edge on the side of the chassis. 13. Slide the cover toward the rear. 14. Tighten the thumbscrew at the front of the cover. 15. To replace the right side cover, position the cover's tabs next to the respective holes along the outer edge on each side of the chassis. 16. Slide the cover toward the rear. 17. Tighten the thumbscrew at the front of the chassis. 18. To replace the bezel, insert the tabs at the bottom of the bezel into the slots on the chassis. 19. Swing the top of the bezel toward the chassis until it snaps into place. See Figure 3-8. Figure 3-8. Replacing the Bezel 20. Return the HP NetServer to normal operation. 31