HP LH4r HP Netserver LC 2000 Installation Guide - Page 21
Non-Hot Swap Device Indicators
View all HP LH4r manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
Chapter 2 Controls, Ports and Indicators Non-Hot Swap Device Indicators The indicators for non-Hot Swap devices, which provide operational status, are also shown in Figure 2-3. The indicators shown in Figure 2-3 also apply to the rack-mount model (LC 2000r). See Table 2-4 for Backup Tape drive LED Codes. Table 2-4. Backup Tape Drive LED Codes Left LED Right LED Definition Off On Flashing* Pulsing** Off Off On Flashing* Pulsing** Off Off Off Off On Pulsing** Pulsing** Pulsing** Pulsing** No Power Cartridge Loaded, but No activity Cartridge Loaded and Active Loading/Unloading/Ejecting/Power-On Self Test Fail No Cartridge, but Caution (cleaning required) Cartridge Loaded, but Caution (cleaning required) Cartridge Loaded, Drive Active, Caution (cleaning required) Cartridge Loading/Unloading, Caution (cleaning required) * Flashing at 4 Hz rate ** Pulsing at 2 Hz rate NOTE For more information on the HP Tape Drive and its error codes, refer to the documentation provided with the tape drive or refer to Hewlett-Packard's web site, at: http://www.hp.com. Refer to Chapter 4, "Installing Mass Storage Devices," for installation information. 13