HP LH4r HP Netserver LC 2000 Installation Guide - Page 13
Rack Mount Installation
View all HP LH4r manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Chapter 1 Setting Up the HP NetServer Rack Mount Installation Follow the setup steps in the exact order shown below for a successful rack installation. Skip any steps that do not apply to your installation. Shown Removed for Detail Figure 1-3. HP NetServer LC 2000r 1. Unpack the shipping box and verify the contents against the Contents List included with your HP NetServer. a. If anything is missing or damaged, call your reseller. b. Store the empty boxes and packing material in a safe place. This is especially important if you plan to ship the HP NetServer elsewhere for final installation. WARNING To prevent serious injury or damage to the HP NetServer, do not attempt to lift the HP NetServer by yourself. The HP NetServer LC 2000r weighs approximately 80 lbs. (36 kg) and requires more than one person to lift it. 2. Familiarize yourself with the HP NetServer's controls, ports, and indicators. Refer to Chapter 2, "Controls, Ports, and Indicators." 5