HP LH4r HP Netserver LC 2000 Installation Guide - Page 99
Attaching the Cable Management Arm
View all HP LH4r manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 99 highlights
Chapter 8 Rack-Mounting the HP NetServer Figure 8-10. Pressing in the Release Latches 14. Verify the NetServer will slide all the way into the rack, before continuing with the procedures. 15. Continue with the next section, "Attaching the Cable Management Arm," before securing the HP NetServer in the rack. Attaching the Cable Management Arm Use this procedure to mount the Cable Management Arm on the HP NetServer LC 2000r when mounted in the HP System/E or System /U racks. The HP NetServer LC 2000r's Cable Management Arm allows the cables, including the power cord, to move in and out with the HP NetServer chassis without any damage or being accidentally disconnected. See Figure 8-11. 91
Chapter 8
Rack-Mounting the HP NetServer
91
Figure 8-10. Pressing in the Release Latches
14.
Verify the NetServer will slide all the way into the rack, before continuing
with the procedures.
15.
Continue with the next section, "Attaching the Cable Management Arm,"
before securing the HP NetServer in the rack.
Attaching the Cable Management Arm
Use this procedure to mount the Cable Management Arm on the HP NetServer
LC 2000r when mounted in the HP System/E or System /U racks. The HP
NetServer LC 2000r’s Cable Management Arm allows the cables, including the
power cord, to move in and out with the HP NetServer chassis without any
damage or being accidentally disconnected. See Figure 8-11.