HP LaserJet M1005 Service Manual - Page 101
Print-cartridge door, CAUTION,
View all HP LaserJet M1005 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 101 highlights
Print-cartridge door NOTE Some photos show a device other than the HP LaserJet M1005 MFP. Repair and replacement procedures in this chapter are for the HP LaserJet M1005 MFP and are not affected by cosmetic differences (for example, the color of the covers) shown in these photos. 1. Remove the scanner assembly. See Scanner assembly on page 67. 2. Fully open the print-cartridge door and gently pull downward on both print-cartridge swing arms (callout 1) to release them (the left arm is shown disengaged). CAUTION Be careful when releasing the swing arms. They can easily break. Figure 6-38 Remove the print-cartridge door (1 of 2) 3. Rotate the door toward the back of the device and then lift it up and off of the device. Figure 6-39 Remove the print-cartridge door (2 of 2) ENWW Removal and replacement strategy 85