HP LaserJet M1005 Service Manual - Page 63
RAM, Universal serial bus (USB) interface, Control panel, EconoMode, possibly reduce cost-per-
View all HP LaserJet M1005 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
RAM The device contains two types of random-access memory (RAM): ● One bank of nonvolatile RAM (NVRAM) stores parameters. ● Dynamic random access memory (DRAM) provides temporary storage of the device program code along with copy, scan, and print data. Universal serial bus (USB) interface The formatter receives incoming data through its USB interface. This interface provides high-speed, two-way communication between the device and the host, allowing you to change device settings and monitor device status from the host computer. Control panel The control panel consists of the following features: ● groups of buttons to control copy and menu navigation ● a 2-by-16 LCD display that shows status, menus, and messages EconoMode Select EconoMode to do the following: ● enable the device to use less toner ● extend the life of the toner supply ● possibly reduce cost-per-page NOTE Using EconoMode reduces print quality because the printed image is lighter. HP does not recommend full-time use of EconoMode. If EconoMode is used full-time, the toner supply can outlast the mechanical parts in the print cartridge. If print quality degrades under these circumstances, you must install a new toner cartridge, even if toner remains in the existing cartridge. ENWW Formatter system 47