HP LaserJet M1005 Service Manual - Page 123
Paper-pickup assembly,
View all HP LaserJet M1005 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 123 highlights
Paper-pickup assembly 1. Remove the following assemblies. ● Scanner assembly. See Scanner assembly on page 67. ● Left cover. See Device side covers on page 82. ● Rear cover and fuser cover. See Rear cover and fuser cover on page 86. ● Print cartridge door. See Print-cartridge door on page 85. ● Front cover. See Front cover on page 88. ● Transfer roller. See Transfer roller on page 80. ● Fuser. See Fuser on page 105. 2. Unplug and remove any additional wire-harnesses as necessary to release the paper-pickup assembly. Unplug and remove the wire from the solenoid to the formatter. 3. Remove six screws (callout 1) and remove the assembly. Figure 6-68 Remove the paper-pickup assembly ENWW Removal and replacement strategy 107
Paper-pickup assembly
1.
Remove the following assemblies.
●
Scanner assembly. See
Scanner assembly
on page
67
.
●
Left cover. See
Device side covers
on page
82
.
●
Rear cover and fuser cover. See
Rear cover and fuser cover
on page
86
.
●
Print cartridge door. See
Print-cartridge door
on page
85
.
●
Front cover. See
Front cover
on page
88
.
●
Transfer roller. See
Transfer roller
on page
80
.
●
Fuser. See
Fuser
on page
105
.
2.
Unplug and remove any additional wire-harnesses as necessary to release the paper-pickup
assembly. Unplug and remove the wire from the solenoid to the formatter.
3.
Remove six screws (callout 1) and remove the assembly.
Figure 6-68
Remove the paper-pickup assembly
ENWW
Removal and replacement strategy
107