HP LaserJet M1005 Service Manual - Page 129

Control-panel messages, Alert and warning messages, Critical error messages, warnings

Page 129 highlights

Control-panel messages The majority of the control-panel messages are intended to guide the user through typical operation. The control-panel messages indicate the status of the current operation, and include a page count on the second line of the display, if appropriate. When the device is receiving print data or scanning commands, control-panel messages indicate this status. In addition, alert messages, warning messages, and critical error messages indicate situations that might require some action. Alert and warning messages Alert and warning messages appear temporarily and might require the user to acknowledge the message by pressing Menu/Enter to resume or by pressing Cancel to cancel the job. With certain warnings, the job might not complete or the print quality might be affected. If the alert or warning message is related to printing and the auto-continue feature is on, the device will attempt to resume the printing job after the warning has appeared for 10 seconds without acknowledgement. Control panel message Device error Press [OK] Jam in print paper path alternates with Open door and clear jam Page too complex Press [OK] Printer jam clear paper path Scanner error Settings cleared Description Recommended action The device experienced an internal communication error. This is a warning message only. Job output might be affected. The device has detected a jam in the paper path. Clear the jam from the area indicated on the device control panel, and then follow the control panel instructions. The device could not print the current page because of its complexity. Press Menu/Enter to clear the message. Allow the device to finish the job, or press Cancel to cancel the job. The device has detected a jam in the input trays. Clear the jam from the area indicated on the device control panel, and then follow the control panel instructions. The device has detected a scan module error Turn the device off and then on again. The device has cleared job settings. Re-enter any appropriate job settings. Critical error messages Critical error messages can indicate some kind of failure. Restarting the device might fix the problem. Control-panel display Engine comm. Error Error code number None Error Turn off then on 54.1C Description Action The device has experienced an 1. Turn off the power by using internal hardware error. the power switch, and then wait at least 30 seconds. 2. If a surge protector is being used, remove it. Plug the device directly into the wall socket. 3. Turn on the power and wait for the device to initialize. The device has experienced an Turn off the power by using the internal hardware error. power switch, wait at least 30 ENWW Control-panel messages 113

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
  • 211
  • 212
  • 213
  • 214
  • 215
  • 216
  • 217
  • 218
  • 219
  • 220
  • 221
  • 222
  • 223
  • 224

Control-panel messages
The majority of the control-panel messages are intended to guide the user through typical operation.
The control-panel messages indicate the status of the current operation, and include a page count on
the second line of the display, if appropriate. When the device is receiving print data or scanning
commands, control-panel messages indicate this status. In addition, alert messages, warning
messages, and critical error messages indicate situations that might require some action.
Alert and warning messages
Alert and warning messages appear temporarily and might require the user to acknowledge the
message by pressing
Menu/Enter
to resume or by pressing
Cancel
to cancel the job. With certain
warnings, the job might not complete or the print quality might be affected. If the alert or warning message
is related to printing and the auto-continue feature is on, the device will attempt to resume the printing
job after the warning has appeared for 10 seconds without acknowledgement.
Control panel message
Description
Recommended action
Device error Press [OK]
The device experienced an internal
communication error.
This is a warning message only. Job output
might be affected.
Jam in print paper path
alternates with
Open door and clear jam
The device has detected a jam in the paper
path.
Clear the jam from the area indicated on the
device control panel, and then follow the
control panel instructions.
Page too complex Press [OK]
The device could not print the current page
because of its complexity.
Press
Menu/Enter
to clear the message.
Allow the device to finish the job, or press
Cancel
to cancel the job.
Printer jam clear paper path
The device has detected a jam in the input
trays.
Clear the jam from the area indicated on the
device control panel, and then follow the
control panel instructions.
Scanner error
The device has detected a scan module error
Turn the device off and then on again.
Settings cleared
The device has cleared job settings.
Re-enter any appropriate job settings.
Critical error messages
Critical error messages can indicate some kind of failure. Restarting the device might fix the problem.
Control-panel display
Error code number
Description
Action
Engine comm. Error
None
The device has experienced an
internal hardware error.
1.
Turn off the power by using
the power switch, and then
wait at least 30 seconds.
2.
If a surge protector is being
used, remove it. Plug the
device directly into the wall
socket.
3.
Turn on the power and wait
for the device to initialize.
Error Turn off then on
54.1C
The device has experienced an
internal hardware error.
Turn off the power by using the
power switch, wait at least 30
ENWW
Control-panel messages
113