HP LaserJet M1005 Service Manual - Page 108
Caution,
View all HP LaserJet M1005 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 108 highlights
3. Disconnect one FFC (callout 3) and six wire-harness connectors (callout 4) and remove them from the wire loom. CAUTION Do not bend or fold the FFCs during the removal or reinstallation process. Figure 6-49 Remove the power supply (2 of 3) 4. Remove four screws (callout 5) and remove the wire-harness from the wire loom (callout 6) and unclip the wire loom from the chassis (remove the wire-harness from this wire loom). Remove the power supply. Figure 6-50 Remove the power supply (3 of 3) 92 Chapter 6 Removal and replacement ENWW
3.
Disconnect one FFC (callout 3) and six wire-harness connectors (callout 4) and remove them from
the wire loom.
CAUTION
Do not bend or fold the FFCs during the removal or reinstallation process.
Figure 6-49
Remove the power supply (2 of 3)
4.
Remove four screws (callout 5) and remove the wire-harness from the wire loom (callout 6) and
unclip the wire loom from the chassis (remove the wire-harness from this wire loom). Remove the
power supply.
Figure 6-50
Remove the power supply (3 of 3)
92
Chapter 6
Removal and replacement
ENWW