HP LaserJet M1005 Service Manual - Page 25
Colored paper, Custom-size media, Labels, Label construction, Transparencies
View all HP LaserJet M1005 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
Colored paper ● Colored paper should be of the same high quality as white xerographic paper. ● Pigments used must be able to withstand the fuser temperature of 200°C (392°F) for 0.1 second without deterioration. ● Do not use paper with a colored coating that was added after the paper was produced. Custom-size media Use the main input tray for multiple sheets. CAUTION Make sure that the sheets are not stuck together before you load them. Labels HP recommends that you print labels from the priority input tray. CAUTION Do not feed a sheet of labels through the device more than once. The adhesive degrades and might damage the device. Label construction When selecting labels, consider the quality of the following components: ● Adhesives: The adhesive material should be stable at 200°C (392°F), the maximum fuser temperature. ● Arrangement: Only use labels with no exposed backing between them. Labels can peel off sheets that have spaces between the labels, causing serious jams. ● Curl: Before printing, labels must lie flat with no more than 13 mm (0.5 inch) of curl in any direction. ● Condition: Do not use labels with wrinkles, bubbles, or other indications of separation. Transparencies Transparencies must be able to withstand 200°C (392°F), the maximum fuser temperature. CAUTION You can print transparencies from the 150-sheet tray (tray 1). However, do not load more than 75 transparencies at one time into the tray. ENWW Guidelines for using media 9