HP OmniBook xe3-gf HP Omnibook XE3-GF - Corporate Evaluators Guide - Edition 4 - Page 159
Recovering and Reinstalling Software
View all HP OmniBook xe3-gf manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 159 highlights
Solving Problems with Your Computer Recovering and Reinstalling Software Recovering and Reinstalling Software You can use the Recovery CD to recover an original build. If you need to recover a specific application, you can reinstall the software directly from your hard drive; for instructions, see "To recover an application" on page 161. The Recovery CD provides the HP notebook-specific Windows drivers to configure your custom system. You can find drivers: • On the hard drive under c:\hp\drivers. • On the Recovery CD, under \hp\drivers. • On the HP notebook web site at www.hp.com/notebooks. This web site contains the latest updates of software drivers for your computer. CAUTION To recover the factory installation of your hard disk The following procedure describes how to recover the original Windows software and operating system that came with your computer. This procedure formats the hard disk drive. After the hard disk drive is formatted, you'll need to reinstall any applications. Reformatting the hard disk drive will erase all data on the disk. Do not interrupt the following process or unplug the AC adapter until the process is complete. 1. Important: back up all data from your hard disk. The following steps delete all data from the disk. 2. Connect the AC adapter to the computer. 3. Insert the Recovery CD (disc 1) in the CD-ROM drive. If the computer is turned off, insert a straightened paper clip into the hole in the drive door to open it. 4. Turn on or restart the computer. If the computer is running, click Start, Shut Down (or Turn Off Computer), Restart. 5. When you see the HP logo, press ESC to display the Boot menu. 6. Use the arrow keys to select the CD-ROM drive as the boot device, and press Enter. Corporate Evaluator's Guide 159