Kyocera TASKalfa 5002i Fax System 12 Operation Guide R4 2016.08 - Page 118

Using Convenient Fax Functions > Polling Communication Using Polling Transmission 1 [FAX Box] on the Home screen > [Polling Box] 2 Place the originals. 3 Display the screen. Select [Store File]. 4 Select the type of originals, scanning density, etc., as necessary. The table below lists the items to be set. Function Original Image Mixed Sized Originals*1 2-sided/Book Original*2 Original Orientation Storing Size Density Original Image Scan Resolution Zoom Centering Border Erase Continuous Scan Job Finish Notice Description Select image quality. Allows you to use the document processor to load and store multiple originals of different sizes. Select the type and binding of originals. To ensure that the originals are stored in the correct orientation, this indicates the orientation of the original document top edge. To use the following functions, select the orientation of the originals. • 1-sided / 2-sided Selection • Border Erase Selects the storage size (the size of stored originals). Adjusts the density used for scanning originals. Select the image quality according to the original image type. Chooses the level of detail used for scanning originals. Automatically enlarges or reduces scanned originals to match the storage size. When you have scanned the original after specifying the original size and sending size, depending on these sizes, a margin is created at the bottom, left, or right side of paper. By using the centering, the image is placed with a margin equally created at each of the page Top/Bottom and Left/Right. Scans originals with the black frame around the outside of the originals erased. Allows you to divide originals that cannot be placed in the document processor at one time into multiple scans and then store the result as a single file. With this function, originals continue to be scanned until you select [Finish Scan]. Sends a notice by an e-mail when a scanning is complete. 5-29