Kyocera TASKalfa 5002i Fax System 12 Operation Guide R4 2016.08 - Page 121
Using Polling Reception with Sub Addresses, Using Polling Reception
View all Kyocera TASKalfa 5002i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 121 highlights
Using Convenient Fax Functions > Polling Communication Using Polling Reception NOTE When the other party is using sub addresses, refer to Using Polling Reception with Sub Addresses below. 1 Select [FAX] on the Home screen. 2 Turn on polling reception. [Advanced Setup] > [FAX Polling RX] > [On] > [OK] 3 Specifying destination. Methods For Entering the Destination (page 3-7) 4 Press the [Start] key. The operations for reception begin. NOTE When [On] is selected in [Dest. Check before Send], a destination confirmation screen is displayed when you press the [Start] key. Confirmation Screen of Destinations (page 7-13) Using Polling Reception with Sub Addresses For polling reception, enter the sub address (on this machine, sub address and sub address password) set at the sending machine. This communication is still possible when the other party is using a third-party machine provided it is equipped with the same type of sub address communication function. IMPORTANT Check the sub address set by the sender beforehand. 1 Select [FAX] on the Home screen. 2 Turn on polling reception. To turn on polling reception, refer to the following: Polling Reception (page 5-31) 3 Select the destination, and entering the sub address. For the procedure for setting a sub address, refer to the following: Sub Address Transmission (page 5-25) For the procedure for selecting a destination, refer to the following: Methods For Entering the Destination (page 3-7) NOTE You can select destinations using a combination of numeric keys input, One Touch Key selection and selection from the Address Book containing registered sub addresses. 5-32