Kyocera TASKalfa 5002i Fax System 12 Operation Guide R4 2016.08 - Page 84

Receiving Faxes > Automatic Reception Automatic Reception Flow of automatic reception 1 Reception Starts When a fax comes in, the [Processing] indicator blinks and reception automatically begins. . NOTE When a telephone (commercially available product) is connected to the machine, reception starts after the telephone rings. You can change the number of times the ringing tone rings. FAX (page 8-9) Memory Reception When the machine cannot print a fax due to paper running out or a paper jams, it temporarily stores originals that have been sent in the image memory. When the machine returns to the printable state, printing starts. The number of pages that can be stored depends on the pages. As a general guideline, about 7,000 or more A4 size pages at normal resolution can be stored. During memory reception, FAX Reception Printing Jobs are displayed on Printing Jobs of the Status screen. To print the received originals, supply paper or remove jammed paper. For the Status screen, refer to the following: Machine's Operation Guide 2 Reception Print Received faxes are output to the inner tray with the printed side facing down. Canceling reception (Disconnection of communication) When you cancel receiving by disconnecting the telephone line during communication, use the following procedure. 1 Select the [Status/Job Cancel] key. 2 Disconnection of communication. [Device/Communicate] > "FAX Port 1" or "FAX Port 2" [Line Off] When communication is disconnected, reception stops. 4-3