Kyocera TASKalfa 5002i Fax System 12 Operation Guide R4 2016.08 - Page 70

Sending Faxes > Border Erase Border Erase Erases the black border that forms around the image. The following modes are available. Off Border Erase Sheet Item Border Back Page Border Erase Book Border Gutter Back Page Individual Border Erase Top Bottom Left Right Back Page Original Orientation Value Description Metric: 0 mm to 50 mm (in 1 mm increments) Inch: 0.00 to 2.00" (in 0.01" increments) Same as Front Page, Do Not Erase Metric: 0 mm to 50 mm (in 1 mm increments) Inch: 0.00 to 2.00" (in 0.01" increments) Same as Front Page, Do Not Erase Metric: 0 mm to 50 mm (in 1 mm increments) Inch: 0.00 to 2.00" (in 0.01" increments) Set the border erase width.*1 Set the value by selecting [+] or [-]. Select [# Keys] to use the numeric keys for entry. For 2-sided originals, select [Back Page] and then select [Same as Front Page] or [Do Not Erase]. Set the border erase width.*1 Set the value by selecting [+] or [-]. Select [# Keys] to use the numeric keys for entry. For 2-sided originals, select [Back Page] and then select [Same as Front Page] or [Do Not Erase]. Set the border erase width.*1 Set the value by selecting [+] or [-]. Select [# Keys] to use the numeric keys for entry. Same as Front Page, Do Not Erase Top Edge on Top, Top Edge on Left For 2-sided originals, select [Back Page] and then select [Same as Front Page] or [Do Not Erase]. Select the orientation of the original document top edge to scan correct direction. Select [Original Orientation] to choose orientation of the originals, either [Top Edge on Top] or [Top Edge on Left]. Then select [OK]. *1 The input units can be changed in System Menu. Machine's Operation Guide 3-24