Kyocera TASKalfa 5002i Fax System 12 Operation Guide R4 2016.08 - Page 217
i-FAX Settings, Accessing Command Center RX - admin password
View all Kyocera TASKalfa 5002i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 217 highlights
Internet Faxing (i-FAX) > i-FAX Settings i-FAX Settings To send and receive Internet faxes, you must first specify the SMTP server and POP3 server settings. Specify these settings using Command Center RX on a computer that is connected to this machine via a network. Refer to the machine's Operation Guide for information on the network settings. Accessing Command Center RX 1 Display the screen. 1 Launch your Web browser. 2 In the address or location bar, enter the machine's IP address or the host name. Examples: 10.180.81.3/ (for IP address) MFP001 (if the host name is "MFP001") The web page displays basic information about the machine and Command Center RX as well as their current status. NOTE If the screen "There is a problem with this website's security certificate." is displayed, configure the certificate. Command Center RX User Guide You can also continue the operation without configuring the certificate. 3 Enter the user name and password of the administrator, and click Login. Setting Administrator User Name, and Password restricts general users' access to pages other than the Start page. For security purposes, setting the Administrator password is highly recommended. The default Administrator password is factory-set as 'Admin'. 4 Click 'Function Settings' from the navigation bar on the left to view and set values for that particular category. 5 Click 'FAX / i-FAX'. The Transmit Settings dialog box will appear. Command Center RX User Guide 10-5