Kyocera TASKalfa 5002i Fax System 12 Operation Guide R4 2016.08 - Page 48
Basic transmission procedure
View all Kyocera TASKalfa 5002i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
Sending Faxes > Basic transmission procedure Basic transmission procedure The basic procedure for using the fax system is explained below. 1 Select [FAX] on the Home screen. The base screen for fax appears. 2 Place the originals. NOTE The illustration varies between models. For placing originals, refer to the following: Machine's Operation Guide 3 Select the transmission method. There are two transmission methods: memory transmission and direct transmission. Memory transmission: The original is scanned into memory before communication starts. Memory transmission is selected by default. Direct transmission: The destination is dialed and communication starts before the original is scanned. Select [Direct] to change the transmission method to direct transmission. The key will be highlighted on the touch panel. If the [Direct] is selected in the highlighted state, the transmission method will change to memory transmission. FAX Direct Transmission (page 3-28) 4 Specifying destination. Specify the transmission destination. Methods For Entering the Destination (page 3-7) 5 Selecting the functions. Select the tab, and set transmitting functions that can be used. Fax transmission functions (page 3-18) 3-2