Kyocera TASKalfa 5002i Fax System 12 Operation Guide R4 2016.08 - Page 69

Sending Faxes > FAX TX Resolution FAX TX Resolution Select fineness of images when sending FAX. The larger the number, the better the image resolution. However, better resolution also means larger file sizes and longer send times. Item Description 600 × 600 dpi when sending originals with minute characters and lines as finely as possible Typical character size: 6 point (example: Resolution ) Resolution 400x400dpi Ultra Fine when sending originals with minute characters and lines more finely Typical character size: 6 point (example: Resolution ) Resolution 200x400dpi Super Fine when sending originals with minute characters and lines Typical character size: 6 point (example: Resolution ) Resolution 200 × 200 dpi Fine when sending originals with relatively small characters and thin lines Typical character size: 8 point (example: Resolution Resolution) 200 × 100 dpi Normal when sending originals with standard size Typical character size: 10.5 point characters (example: Resolution Resolution) NOTE The default setting is [200 × 100 dpi Normal]. The higher the resolution, the clearer the image, but the fax transmission time is longer. Zoom Scan originals by automatically zooming them according to the sending size. (Value: [100%] / [Auto]) NOTE If the original is scanned at full size, the image may be reduced if a smaller paper size is set on the receiving machine. Centering When you have sent/stored the original after specifying the original size and sending size, depending on these sizes, a margin is created at the bottom, left, or right side of paper. By using the Centering function, the image is placed with a margin equally created for all edges. (Value: [Off] / [On]) 3-23