Kyocera TASKalfa 5002i Fax System 12 Operation Guide R4 2016.08 - Page 231
Error Code List
View all Kyocera TASKalfa 5002i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 231 highlights
Troubleshooting > Error Code List Error Code List When a transmission error occurs, one of the following error codes is recorded in the TX/RX Result Report and Activity Report. NOTE "U" or "E" will appear in the error code depending on the communication speed setting. Error Code Busy CANCELED E00300 U00300 E00430 - E00462 U00430 - U00462 E00601 - E00690 U00601 - U00690 E00700 U00700 E00800 - E00811 U00800 - U00811 E00900 - E00910 U00900 - U00910 E01000 - E01097 U01000 - U01097 E01100 - E01196 U01100 - U01196 U01400 E01500 Possible Cause/Action Failed to establish connection with the recipient despite auto redialing the preset number of times. Send again. Transmission was canceled due to an action to cancel transmission. Reception was canceled due to an action to cancel reception. Paper depletion occurred at the recipient machine. Check with the recipient. Reception was canceled because of mismatching of communication features with the sender machine although the line connection was established. Communication was stopped due to the machine failure. Send or receive again. Communication was stopped due to failure on the part of the sender or recipient machine. Page(s) not sent correctly. Send again. If you still have trouble, reduce TX Start Speed and send again. NOTE If the communication error occurs frequently, change the default setting of TX Start Speed in System Menu. Page(s) not received correctly. Ask the sender to resend. NOTE If the communication error occurs frequently, change the default setting of RX Start Speed in System Menu. Communication error occurred during transmission. Send again. If you still have trouble, reduce TX Start Speed and send again. NOTE If the communication error occurs frequently, change the default setting of TX Start Speed in System Menu. Communication error occurred during reception. Ask the sender to resend. NOTE If the communication error occurs frequently, change the default setting of RX Start Speed in System Menu. Failed to establish communication with the sender or recipient machine because dialing registered for a tone line system was used in a pulse line system. Communication error occurred during high-speed transmission. Send again. If you still have trouble, reduce TX Start Speed and send again. NOTE If the communication error occurs frequently, change the default setting of TX Start Speed in System Menu. 11-6