Kyocera TASKalfa 5002i Fax System 12 Operation Guide R4 2016.08 - Page 192
TX Start Speed Port1
View all Kyocera TASKalfa 5002i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 192 highlights
Fax Settings > Default fax settings Item FAX Local FAX Number 1 Local FAX Number 2*1 Dialing Mode (Port 1) (Inch version only) Dialing Mode (Port 2)*1 (Inch version only) Local FAX ID ECM TX (Port1) ECM TX (Port2)*1 TX Start Speed (Port1) TX Start Speed (Port2)*1 Description Register the local FAX number printed in the transmit terminal identification (TTI) area. If you have already registered a number, the current registered number is displayed. This item is included in the Quick Setup Wizard. Quick Setup Wizard (page 2-11) Select the telephone line according to the type you are contracted with. Please note that selecting a wrong telephone line will prevent you from sending fax. Value: Tone(DTMF), Pulse(10PPS) This item is included in the Quick Setup Wizard. Quick Setup Wizard (page 2-11) Register the local FAX ID. This item is included in the Quick Setup Wizard. Quick Setup Wizard (page 2-11) NOTE: The Local FAX ID is used for transmission limit purposes. Transmission Restriction (page 8-16) Set whether ECM TX is performed. ECM is a communication mode specified by the ITU-T (International Telecommunication Union) that retransmits data when an error occurs. Fax machines that have ECM mode check for errors as they communicate, preventing distortion of the image due to noise on the line and other conditions. Value: On, Off NOTE When there is a large amount of noise on the line, communication may take slightly longer than when [Off] is selected. Set the TX Start Speed. When communication conditions are bad, the fax may not be transmitted correctly. In that case, set a lower TX Start Speed. Value: 9600bps, 14400bps, 33600bps NOTE Normally this should be used with the default setting. *1 This function is displayed when 2 optional FAX Kits (Dual FAX option) are installed. 8-11