Kyocera TASKalfa 5002i Fax System 12 Operation Guide R4 2016.08 - Page 221

Internet Faxing (i-FAX) > i-FAX Settings i-FAX Settings Item Transmission Reception E-mail Send Settings Transmission Type Direct SMTP Sender Address*1 Direct SMTP Port Number Direct SMTP Timeout Direct SMTP Port Number Direct SMTP Timeout E-mail Size Limit Sender Address*2 Signature Function Default Description Allows to choose a method of sending from [Specify for Each Destination], [Via server - On], and [Via server - Off (Direct SMTP)]. Displays the sender address used for E-mails sent by Direct SMTP from this machine. Enter the port number used by Direct SMTP. Normally, 25 is used. Sets the timeout time in seconds during which this device retries to connect to the SMTP server. Enter the port number used by Direct SMTP. Normally, 25 is used. Sets the timeout time in seconds during which this device retries to connect to the SMTP server. Enter the maximum size of E-mail that can be sent in Kilobytes. When the value is 0, the limitation for Email size is disabled. Displays the sender address used for E-mails sent from this machine. Set in [E-mail Address] in POP3 User Settings. Displays the signature to be inserted in the end of the E-mail body. Set on the [E-mail Settings] page. The default settings can be changed in [Common/ Job Default Settings] page. *1 When Direct SMTP is used, this must always be set. *2 When Internet FAX is used, this must always be set. After completing the settings, click [Submit] to save the settings. 10-9