Lexmark W820 Service Manual - Page 111
Spring Tension 80, Sensor and Harness Earth Removal, Removal
UPC - 734646210508
View all Lexmark W820 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 111 highlights
4025-Finisher Spring Tension 80, Sensor and Harness Earth Removal Removal 1. Remove the Rear Cover. 2. Unhook the tension spring 80 from the hole in the H-Tra frame. 3. Remove two screws that secure the tension bracket assembly to the H-Tra, and remove the tension bracket assembly together with tension spring 80. 4. Unhook the tension spring 80 from the hole in the tension bracket assembly, and remove the tension spring Tension 80. 5. Unplug the connector (P/J 260) of the H-Tra harness assembly from the sensor. 6. Unhook the sensor at three places, and remove the sensor. 7. Remove two screws that secure the earth harness to the H-Tra, and remove the earth harness. Removal and Replacement Procedures 4-3
Removal and Replacement Procedures
4-3
4025-Finisher
Spring Tension 80, Sensor and Harness Earth Removal
0, Sensor and Harness Earth Removal
Removal
1.
Remove the Rear Cover.
2.
Unhook the tension spring 80 from the hole in the H-Tra frame.
3.
Remove two screws that secure the tension bracket assembly to the H-Tra, and
remove the tension bracket assembly together with tension spring 80.
4.
Unhook the tension spring 80 from the hole in the tension bracket assembly, and
remove the tension spring Tension 80.
5.
Unplug the connector (P/J 260) of the H-Tra harness assembly from the sensor.
6.
Unhook the sensor at three places, and remove the sensor.
7.
Remove two screws that secure the earth harness to the H-Tra, and remove the
earth harness.