Lexmark W820 Service Manual - Page 195
Motor Assembly-MP4 Removal, Unhook the Sensor, Exit Roller Open/Close Home Position at three places
UPC - 734646210508
View all Lexmark W820 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 195 highlights
4025-Finisher Motor Assembly-MP4 Removal Removal 1. Remove the Cover-Jogging. 2. Remove the Cover-Top, Front. 3. Unplug the connector (CN 4) of the Harness Motor from the Motor Assembly-MP4. 4. Remove the screws that secure to the Finisher from the Motor Assembly-MP4, and remove the Motor Assembly-MP4 with the Sensor, Exit Roller Open/Close Home Position. 5. Unhook the Sensor, Exit Roller Open/Close Home Position at three places, and remove the Sensor, Exit Roller Open/Close Home Position from the Motor Assembly-MP4. Replacement 1. Align the Sensor, Exit Roller Open/Close Home Position with the mounting positions in the Motor Assembly-MP4, and secure it. 2. Align the Motor Assembly-MP4 with the mounting position in the Finisher, and secure it with the screws. 3. Plug the connector (CN 4) of the Harness Motor to the Motor Assembly-MP4. 4. Mount the Cover-Top, Front. 5. Mount the Cover-Jogging. Removal and Replacement Procedures 4-87