Lexmark W820 Service Manual - Page 212

4025-Finisher Motor Assembly-Swing Removal Removal 1. Remove the Cartridge. 2. Remove the Bottle Assembly-Dust. 3. Remove the Cover-Jogging. 4. Remove the Cover-Top, Front and Cover-Top, Rear. 5. Remove the Cover-Rear. 6. Remove the Cover-Open, Front, Cover-Front and Kit Stud Cover. 7. Remove the Stapler Assembly. 8. Remove the Inner Cover. 9. Remove six screws that secure the Cover Upper Left Assembly to the Finisher frame, and remove the Cover Upper Left Assembly. 10. Remove the Latch Assembly and Switch Docking. 11. Remove the Stapler Assembly. 12. Remove the Stapler harness assembly. 13. Unplug the connector (CN 9) of the Stapler harness assembly from the Motor Assembly-Swing. 14. Remove the screw that secures the Motor Assembly-Swing, and remove the Motor Assembly-Swing in diagonal upper rear direction. 4-104 Service Manual