Lexmark W820 Service Manual - Page 210

4025-Finisher Traverse Motor Assembly Removal Removal 1. Remove the Cartridge. 2. Remove the Bottle Assembly-Dust. 3. Remove the Cover-Jogging. 4. Remove the Cover-Top, Front and Cover-Top, Rear. 5. Remove the Cover-Rear. 6. Remove the Cover-Open, Front, Cover-Front and Kit Stud Cover. 7. Remove the Inner Cover. 8. Remove six screws that secure the Cover Upper Left Assembly to the frame of the Finisher, and remove the Cover Upper Left Assembly. 9. Remove the Latch Assembly and Switch Docking. 10. Remove the Stapler Assembly. 11. Unplug the connector (CN 8) of the Harness Motor from the Motor Assembly-MP8. 12. Remove two screws that secure the Damper to the large frame of the stapler, and remove the Damper together with the Gear and Motor Assembly-MP8. 13. Remove the E-ring that secures the Gear to the shaft of the Motor Assembly-MP8, and remove the Gear. 14. Remove two screws that secure the Motor Assembly-MP8 to the Damper, and remove the Motor Assembly-MP8. 4-102 Service Manual