Lexmark W820 Service Manual - Page 144
Frame Post Removal
UPC - 734646210508
View all Lexmark W820 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 144 highlights
4025-Finisher Frame Post Removal Removal 1. Place several-ply cardboards or newspapers on the floor, and carefully tumble the Finisher from the left side. 2. Remove the Kit Bracket Assembly and Screw. 3. Remove the Cap-End. 4. Remove the Caster Assembly. 5. Remove E-rings that secure the Pin Right and Roll in the right and left sides of the front, and remove the Pin Right and Roll. 6. Remove the E-ring that secures the Pin Right and Roll, and remove the Pin Right and Roll. 7. Remove the E-ring that secures the Pin Left and Roll, and remove the Pin Left and Roll. 8. Pull the Frame Post off the Finisher. 4-36 Service Manual
4-36
Service Manual
4025-Finisher
Frame Post Removal
Removal
1.
Place several-ply cardboards or newspapers on the floor, and carefully tumble the
Finisher from the left side.
2.
Remove the Kit Bracket Assembly and Screw.
3.
Remove the Cap-End.
4.
Remove the Caster Assembly.
5.
Remove E-rings that secure the Pin Right and Roll in the right and left sides of the
front, and remove the Pin Right and Roll.
6.
Remove the E-ring that secures the Pin Right and Roll, and remove the Pin Right
and Roll.
7.
Remove the E-ring that secures the Pin Left and Roll, and remove the Pin Left and
Roll.
8.
Pull the Frame Post off the Finisher.