Lexmark W820 Service Manual - Page 145
Mount the Kit Bracket Assembly and Screw., Mount the Caster Assembly.
UPC - 734646210508
View all Lexmark W820 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 145 highlights
4025-Finisher Replacement 1. Insert the Frame Post in parallel to the Finisher, and align four holes in the Frame Post with four holes in the Finisher. 2. Aligning the hole in the Roll with the shaft holes for the wheels located on the rear left side, insert the Pin Right from the rear side and secure it with an E-ring. 3. Aligning the hole in the Roll with the shaft holes for the wheels located on the rear right side, insert the Pin Right from the rear side and secure it with an E-ring. 4. Aligning the hole in the Roll with the shaft holes for the wheels located on the front right and left sides, insert the Pin Right from the rear side and secure it with an Ering. 5. Mount the Caster Assembly. 6. Mount the Cap-End. 7. Mount the Kit Bracket Assembly and Screw. 8. Erect the Finisher carefully. Removal and Replacement Procedures 4-37