Lexmark W820 Service Manual - Page 156
Chute Assembly-Inlet Removal
UPC - 734646210508
View all Lexmark W820 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 156 highlights
4025-Finisher Chute Assembly-Inlet Removal Removal 1. Remove the Cover-Jogging. 2. Remove the Cover-Top, Front and Cover-Top, Rear. 3. Remove the Cover-Rear. 4. Remove the Cover-Open, Front, Cover-Front and Kit Stud Cover. 5. Remove two screws that secure to the Finisher from the Chute Assembly-Inlet. 6. Pull the Chute Assembly-Inlet off the Finisher toward the left. Replacement 1. Insert the Chute Assembly-Inlet from the left side of the Finisher, and align it with the mounting position. 2. Secure the Chute Assembly-Inlet with two screws. 3. Mount the Cover-Open, Front, Cover-Front and Kit Stud Cover. 4. Mount the Cover-Rear. 5. Mount the Cover-Top, Front and Cover-Top, Rear. 6. Mount the Cover-Jogging. 4-48 Service Manual
4-48
Service Manual
4025-Finisher
Chute Assembly-Inlet Removal
Removal
1.
Remove the Cover-Jogging.
2.
Remove the Cover-Top, Front and Cover-Top, Rear.
3.
Remove the Cover-Rear.
4.
Remove the Cover-Open, Front, Cover-Front and Kit Stud Cover.
5.
Remove two screws that secure to the Finisher from the Chute Assembly-Inlet.
6.
Pull the Chute Assembly-Inlet off the Finisher toward the left.
Replacement
1.
Insert the Chute Assembly-Inlet from the left side of the Finisher, and align it with the
mounting position.
2.
Secure the Chute Assembly-Inlet with two screws.
3.
Mount the Cover-Open, Front, Cover-Front and Kit Stud Cover.
4.
Mount the Cover-Rear.
5.
Mount the Cover-Top, Front and Cover-Top, Rear.
6.
Mount the Cover-Jogging.