Lexmark W820 Service Manual - Page 186
Insert the Bearing into the Motor Assembly-MP2., Mount the Cover-Top, Rear.
UPC - 734646210508
View all Lexmark W820 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 186 highlights
4025-Finisher Replacement 1. Insert the Bearing into the Motor Assembly-MP2. 2. Align the Motor Assembly-MP2, together with the Bearing, with the mounting position in the Finisher so that the hole in the Bearing enters the shaft of the Frame Assembly-Roll, Shift, and secure them with two screws. 3. Secure the Motor Assembly-MP2 to the Motor Assembly-MP4 with a screw. 4. Plug the connector (CN 2) of the Harness Motor to the Motor Assembly-MP2. 5. Clamp the harness with the Clamp. 6. Mount the Cover-Rear. 7. Mount the Cover-Top, Rear. 8. Mount the Cover-Jogging. 4-78 Service Manual
4-78
Service Manual
4025-Finisher
Replacement
1.
Insert the Bearing into the Motor Assembly-MP2.
2.
Align the Motor Assembly-MP2, together with the Bearing, with the mounting
position in the Finisher so that the hole in the Bearing enters the shaft of the Frame
Assembly-Roll, Shift, and secure them with two screws.
3.
Secure the Motor Assembly-MP2 to the Motor Assembly-MP4 with a screw.
4.
Plug the connector (CN 2) of the Harness Motor to the Motor Assembly-MP2.
5.
Clamp the harness with the Clamp.
6.
Mount the Cover-Rear.
7.
Mount the Cover-Top, Rear.
8.
Mount the Cover-Jogging.