Lexmark W820 Service Manual - Page 205
Stapler II Assembly Removal
UPC - 734646210508
View all Lexmark W820 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 205 highlights
4025-Finisher Stapler II Assembly Removal Removal 1. Open the Cover-Open, Front. 2. Unplug the connector (CN 10) of the Stapler harness assembly from the Stapler Assembly. 3. Turn the knob of the stapler counterclockwise to face the stapler toward the front. 4. Remove two screws that secure to the Stapler Assembly from the Stapler Holder. 5. Lifting up the front of the Stapler Assembly, and pull it off. Replacement 1. Holding the shaft on the front of the Stapler Assembly to the hook of the Stapler Holder, align the hole on the front of the Stapler Assembly with the screw hole in the Stapler Holder. 2. Secure the Stapler Holder to the Stapler Assembly with two screws. 3. Plug the connector (CN 10) of the Stapler harness assembly to the Stapler Assembly. 4. Close the Cover-Open, Front. Removal and Replacement Procedures 4-97